Important Collectors’ Wristwatches, P...

Geneva, Mandarin Oriental Hotel Du Rhône, May 13, 2007

LOT 658

?Reference 739, Pair of deck chronometers? Patek, Philippe & Cie., Genève, No. 182773 and 182774, case No. 626.031 and 626.032, Ref. 739. Movements made in 1917, cased in 1941 and Retailed by A. Linser, Berlin on March 12th, 1942. Very fine and exceptionally rare pair of silver keyless deck and pocket chronometers with Guillaume balances. Accompanied by a contemporary fitted deck box for the two watches and extracts from the archives.

CHF 45,000 - 55,000

EUR 28,000 - 35,000 / USD 37,000 - 45,000

Sold: CHF 82,600

C. Four-body, "bassine", polished, silver hinged cuvette. D. Silver champlevé enamel, matted, champlevé Paris numerals, outer minute track, subsidiary seconds. Blued steel "spade" hands. M. 21???, rhodium-plated, "fausses côtes" decoration, 21 jewels, gold wheel-train, wolf?s-tooth winding, straight line lever escapement, anibal-brass Guillaume cut bimetallic compensation balance, blued steel Breguet balance spring, Wilmot patented micrometric regulator. Dials, cases and movements signed. Diam. 60 mm. Property of a Swiss Gentleman

Click to full view
Image

Grading System
Grade:
Case: 3

Good

Movement: 3*

Good

Overhaul recommended, at buyer's expense

Dial: 3-01

Good

HANDS Original

Notes

The watches of the present lot are exceptionally rare due to the fact that they were sold as and have remained a pair of watches. The fitted deck box gives an interesting insight to the purpose of the pair. The box with its sliding top, which covers one watch at a time, was made to allow the use to have one watch as a primary and the other as a control in a single box that could be easily transported around the ship.

Anibal (Acier au nickel pour balanciers),an alloy invented by Dr. Charles Edouard Guillaume, exhibits unusual properties, both in terms of thermal expansion and in changes in elasticity. These properties are very different from those of two other famous alloys invented by Guillaume, Invar and Elinvar. At the end of the 1800's, Guillaume attempted to eliminate the so-called Middle Temperature Error caused by the fact that the change of rate in a timekeeper with a steel-brass bimetallic balance is approximately a linear function of temperature, while the change of rate caused by change in elasticity of a balance spring is approximately a quadratic function. Thus, it equals zero at only two temperatures, causing secondary error. Countless attempts were made to eliminate Middle Temperature Error, usually by means of auxiliary compensation devices. In 1899, Guillaume noticed that steel with an addition of 44.4% nickel had a negative square coefficient of thermal expansion. This alloy, combined with brass in bimetallic lamina, makes its expansion close to quadratic. Balances with bi-metallic rims made of anibal and brass are usually called Guillaume balances, or, as their inventor called them, integral balances. When combined with special balance springs, they exhibit remarkable temperature stability, on occasion not exceeding 1/50 second per day at 1oC.